| Name | Description | |
|---|---|---|
  | AssemblyDirectory | Returns the Assembly Directory information |
| AssemblyVersion | Gets the Assembly Version of DicomObjects.NET |
| Assume2022Escapes | Controls whether DicomObjects attempts to locate unannounced 2022 escape sequences |
| BufferSize | User controlled internal buffer size if attribute data is a large array. This will define the array size for the list of arrays needed to handle the attribute value.
Used to avoid .NET's array dimension limit for very large data |
| ChangeLossyUIDs | Controls whether DicomObjects changes the UID when doing lossy compression |
| CloseFilesAfterReading | Controls how pixel data is read from disk |
| ColourConverter | Interface to allow override of the default CIELab <=> RGB conversion |
| CombinePDVs | Controls whether to combine outgoing command and data PDVs into a single PDU |
| CurrentLogFileName | Returns the Current DicomObjects Log File Name in full. |
| DefaultCharacterSet | Default Character to set to use if 0008,0005 is absent |
| DefaultFFmpegFilter | Description of the Default filter to apply for FFmpeg processing |
| DefaultIpAddressFamily | The IP Address family to be used where not otherwise specified |
| DefaultReadBehaviour | Default behaviour when reading or receiving files |
| DefaultSOPClasses | Default list of SOP class UID's (Abstract syntaxes) to be used until specifically overridden by user settings |
| DefaultWriteBehaviour | Default behaviour when writing or sending files |
| DeidentifyInLog | A list of keywords fo attributes which should not be included in any standard log file. |
| DescriptionAsSerializationTag | To use attribute string description as tag for Json/XML serialization |
| DirectionStrings | Language specific indicators for anatomic labelling |
| DisplayCacheTime | Controls how long display cache copies of images are retained. |
| Enable10BitDisplay | To allows support for 10bit data. |
| EventLogLevel | Controls the logging of diagnostic message to the LogEvent event. |
| FailOnSuspiciousPreamble | Detect any non-zero data in the preamble (the first 128 bytes) leading to 'DICM', and alert if any unwanted bytes or malicious code is present. A pre-defined list of file formats PreambleFileSignatures is used for checking against the non-zero preamble |
| FileVersion | Gets the File Version of DicomObjects.NET |
| FlushLevel | A level to cause the log to be flushed to disk |
| FontScaling | The factor by which to increase the font size when using DirectX display mode. The default is 1.5, which gives appearance similar to those in GDI mode. |
| HologicCompressedDataAttributeElements | List of attribute elements known to be used by Hologic for their compressed frames used to detect any compressed data in private sequence |
| IgnoreShortPixelData | Try to ignore Short pixel data error to suppress read exception. This does not fix any faulty attributes or guarantee the read pixels are correct and complete |
| ImplementationName | The Implementation Name of this application |
| ImplementationUID | The Implementation UID of this application |
| IndentJson | Controls whether JSON generated is indented and formatted for easy human interpretation |
| JpipInitialSize | The size of the first request (in bytes) to make to a JPIP server. |
| LockGdiOperations | Controls whether to use an explicit lock to prevent recurrent GDI operations from happening |
| LogLicenceDetails | Controls logging of licence initialization details
Suggested use is for debugging purposes only |
| MaximumDateTime | Control the global MaximumDateTime value used by DicomObjects. Default value is DateTime.MaxValue |
| MaximumNesting | Controls to what level deep are nested Sequences parsed |
| MaximumPDUSize | The Maximum PDU size accepted and used by DicomObjects |
| MinFontSize | Contains the Minimum SKFont SKSizeI used when drawing Text Label. |
| MinimumDateTime | Control the global MinimumDateTime value used by DicomObjects. Default value is DateTime.MinValue |
| MoveTimesOut | Controls whether DicomObjects will time out during a C-MOVE operation |
| PreambleFileSignatures | A pre-defined modifiable list of file signatures to match against the preamble if FailOnSuspiciousPreamble is enabled |
| PreferredBitmapMode | Controls method of rendering used by "Bitmap" |
| PreferredCodec | Codec to prioritize if applicable |
| PreserveDoublePrecision | Retain precision for double numbers |
| ProductName | The product name to be shown in licensing Dialogs etc. Default value is "DicomObjects". |
| QuadrupedDirectionStrings | The quadruped equivalent of DirectionStrings allowing localisation of these abbreviations |
| RenderException | Controls whether non-image objects throw an exception during rendering |
| ReUseArrays | Controls whether DicomObjcts re-uses arrays to hold pixel data |
| ReuseOnlyExactArraySize | Controls whether "Over-sized" arrays are used |
| RunningInDocker | Flag to see if application is runner in a Docker container |
| ShowTextBoxForPresentationStates | Controls whether bounding boxes are drawn around internally generated DicomLabel objects derived from text entries in Presentation States |
| SigningLicensePrefix | Set to tell DicomObjects to check the exe.{Prefix}.lic, instead of default exe.lic file |
| ThreadCount | Controls how many threads may be used by DicomObjects when rendering etc. |
| Timeout | The period of time that a network operation will wait if there is no response from the peer |
| UIDRoot | UIDRoot used by the NewUID method |
| UsePerformanceCounters | Controls use of specific performance counters for DicomObjects |
| UsePixelCache | Controls whether to use an area of memory as a pixel cache to reduce demands on the memory allocator |
| ValidDateMax | Maximum allowed DateTime for validation purposes |
| ValidDateMin | Minimum allowed DateTime for validation purposes |
DicomGlobal Class Members
In This Topic
The following tables list the members exposed by DicomGlobal.
Public Properties
Public Methods
| Name | Description | |
|---|---|---|
 | AcceptedTransferSyntaxes | List of Transfer Syntaxes accepted by default for a group of SOP classes |
| AddDictionaryElement | Adds Non-Private Data Element to the Dictionary. |
| AddPrivateDictionaryElement | Adds Private Data Element Creator to the Dictionary. |
| AddToAcceptedTransferSyntaxes | Add an accepted Transfer Syntax into a group used to help control automatic acceptance of transfer syntaxes |
| AddToOfferedTransferSyntaxes | Add an offered Transfer Syntax into a group used to help control automatic acceptance of transfer syntaxes |
| AddToSOPClassGroup | Add a SOP class into a group used to help control use of associated transfer syntaxes |
| ClearAcceptedTransferSyntaxes | Clear all accepted Transfer Syntaxes from a group used to help control automatic acceptance of transfer syntaxes |
| ClearOfferedTransferSyntaxes | Clear all offered Transfer Syntaxes from a group used to help control automatic acceptance of transfer syntaxes |
| ClearSOPClassGroup | Clear all SOP classes from a group used to help control use of associated transfer syntaxes |
| Echo | Sends a DICOM verify (C-ECHO), with IP address, port number, callingAET, calledAET to another application entity, and returns the result |
| FindGroup | Find to which group a particular SOP class is currently assigned |
| GenerateWsiTileOffsets | Parses WSI tile fragments consisting of offset and length of all WSI tiles present in this instance for quick access |
| GetRegString | Overloaded. Returns the key values from internal look up table |
| GetRegWord | Overloaded. Returns the key values from internal look up table |
| GetStatusCodeType | Checks if status code is a defined error code |
| GuidToUID | Construct a DICOM UID from Universally Unique Identifier (GUID) based on the method defined in ISO/IEC 9834-8 / ITU-T X.667 |
| IgnoreAttribute | Instruct DicomObjects to ignore particular attributes |
| IgnoreAttributeGroup | Instruct DicomObjects to ignore particular attributes |
| IsDICOM | Overloaded. Methods to check for DICOM content |
| IsEncrypted | Tests whether a DICOM file is encrypted according the CMS encoding defined in DICOM supplement 895 |
| Keyword | Overloaded. Construct a keyword from arbitrary group and element hex string (not the integer values) |
| KeywordElement | Returns the "element" number for a keyword |
| KeywordGroup | Returns the "group" number for a keyword |
| KeywordTag | Construct a string representation of the Group and Element number of keyword |
| LoadConfigFile | Forces loading of the XML configuration file |
| Log | Add text to the log file. |
| LogToFile | Overloaded. Enables DicomObjects logging |
| LogToFileStop | Stop logging to the currently active file |
| LogToLogger | Overloaded. Enables DicomObjects logging to a user provided Microsoft ILogger interface |
| LogToStream | Enables DicomObjects logging to a user provided stream |
| MakeDictionary | Create a Dataset containing a null copy of all 'known' possible attributes |
| NewUID | Generates a guaranteed unique valid DICOM UID |
| OfferedTransferSyntaxes | List of Transfer Syntaxes offered by default for a group of SOP classes |
| RemoveFromAcceptedTransferSyntaxes | Remove an accepted Transfer Syntax from a group used to help control automatic acceptance of transfer syntaxes |
| RemoveFromOfferedTransferSyntaxes | Remove an offered Transfer Syntax from a group used to help control automatic acceptance of transfer syntaxes |
| RemoveFromSOPClassGroup | Remove a SOP class from a group used to help control use of associated transfer syntaxes |
| ResetPixelCache | Clear any existing pixel cache |
| SetRegString | Insert or replace values in the internal virtual registry |
| SetRegWord | Sets key values in the internal look up table |
| SOPClassGroup | Groups of SOP classes that use the same default Transfer Syntaxes |
| Zoom | The Zoom factor corresponding to a given SkiaSharp.SKMatrix object |
Public Events
| Name | Description | |
|---|---|---|
 | LogEvent | Event fires when loggable events occur |
| OnChangeUid | Event fired when DicomObjects should change a UID for an object |
| ValidateFragments | Routine to allow validation (and if necessary, correction) of fragments of compressed pixel data |
See Also